Deployment Guide

9 VxRail Networking Guide with Dell EMC S4148-ON Switches | version 1.0
1.2.4 VxRail E Series nodes
The VxRail E Series low-profile node is a single or dual-socket 1RU node. The VxRail E Series nodes are
best suited for remote office, stretch cluster or entry-level workloads. E Series nodes have two disk groups,
providing the capacity and performance to handle a wide variety of use cases.
VxRail E Series node front view
1.2.5 The VxRail E, P, V and S Series supports SFP+ or BaseT network adapters.
All VxRail nodes come with one onboard network daughter card (NDC) and depending on the appliance
generation, NDC options vary.
13th Generation Appliances
 Quad-port NDC - 2 x 10GbE SFP+ ports and 2 x 1GbE BaseT ports
 Quad-port NDC - 2 x 10GbE BaseT ports and 2 x 1GbE BaseT ports
14th Generation Appliances
 Quad-port NDC - 4 x 10GbE SFP+ ports
 Quad-port NDC - 4 x Base T ports that support 100 M, 1GbE, and 10GbE ports
The VxRail 4.0 nodes use two 10GbE NDC ports for system traffic.
VxRail 2RU node back view with NDC
VxRail E Series node, back view with NDC