Deployment Guide

28 VxRail Networking Guide with Dell EMC S4148-ON Switches | version 1.0
5 Configuration examples
5.1 Single-switch example
The configuration below is the running configuration seen on the console from the show running-config
command. Portions of the configuration have been removed that are repetitive or are not applicable to
deployment of VxRail.
Switch-1 (S4148-ON)
Global switch settings
hostname Switch-1
snmp-server community name ro
ntp server 100.67.10.20
spanning-tree mode rstp
ip igmp snooping
Management configuration
interface mgmt 1/1/1
no ip address dhcp
ip address 100.67.171.34/24
no shutdown
management route 0.0.0.0/0 100.67.171.254
VLAN configurations
interface vlan1
description Management
no shutdown
!
interface vlan110
description vMotion
no shutdown
!
interface vlan120
description VSAN
no shutdown
ip igmp snooping querier
ip address 192.168.120.254/24
!
interface vlan130
description VM_Network_A
no shutdown