Deployment Guide
Table Of Contents
- 1 Introduction
- 2 Hardware overview
- 3 Leaf-spine overview
- 4 Protocols used in the leaf-spine examples
- 5 Layer 3 configuration planning
- 6 Example 1: Layer 3 with Dell EMC leaf and spine switches using OSPF
- 7 Example 2: Layer 3 with Dell EMC leaf and spine switches using eBGP
- A Dell EMC Networking ONIE switch factory default settings
- B Validated hardware and operating systems
- C Technical support and resources
- D Support and Feedback
40 Dell EMC Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 | Version 1.0
Internal Use - Confidential
B Validated hardware and operating systems
The following table includes the hardware and operating systems used to validate the examples in this guide.
Switches and operating systems used in this guide
Switch
OS / Version
Dell EMC Networking S4148F-ON
10.4.0E(R3)
Dell EMC Networking S4248FB-ON
10.4.0E(R3)
Dell EMC Networking Z9100-ON
10.4.0E(R3)