Command Line Reference Guide

1.1.1.2/32 0 0 1000 00:01:00:00:00:02 Te
7/42 -
2.1.1.2/32 0 0 20 00:03:00:00:00:02 Po
10 -
2.1.1.1/32 0 1 0 00:00:00:00:00:00
CP -
1.1.1.1/32 0 1 0 00:00:00:00:00:00
CP -
2.1.1.0/24 0 1 0 00:00:00:00:00:00
CP -
1.1.1.0/24 0 1 0 00:00:00:00:00:00
CP -
100.1.1.0/24 1 0 20 00:03:00:00:00:02 Po
10 0
100.1.1.0/24 1 0 1000 00:01:00:00:00:02 Te
7/42 0
0.0.0.0/0 0 1 0 00:00:00:00:00:00
CP -
Dell#
Example
(Member-Info)
Dell#show ip cam stack-unit 7 po 0 ecmp-group member-info
detail
Group Index Member Count Mac-Addr
Port VLan ID
---------------------------------------------------------------
-----------------
0 2 00:03:00:00:00:02 Po
10 20
00:01:00:00:00:02 Te
7/42 1000
Dell#
show ip fib stack-unit
View all Forwarding Information Base (FIB) entries of a specific stack-unit.
S6000
Syntax
show ip fib stack-unit id vrf vrf-name [ip-address [mask]
[longer-prefixes] | summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 0
to 7 for the S6000.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
view FIB entries corresponding to that VRF.
ip-address
mask
(OPTIONAL) Enter the IP address of the network destination
to view only information on that destination. Enter the IP
address in dotted decimal format (A.B.C.D). Enter the mask in
slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
754
IPv4 Routing