Command Line Reference Guide

ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
tx Enter the keyword tx for packet transmit-specific
debugging.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Added the tx parameter.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
Parameters
packet-type Enter the keyword packet-type and then the option type
on which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode
solicitation.
• virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging
on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
568
FCoE Transit