Command Line Reference Guide

clear fip-snooping statistics
Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port
interface.
Syntax
clear fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be cleared.
port-type port/
slot
Enter the port-type and slot number of the FIP packet
statistics to be cleared.
port-
channelnumbe
r
Enter the port channel number of the FIP packet statistics to
be cleared.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
debug fip snooping
Enable debugging on FIP snooping.
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx]
Parameters
all Enter the keyword all to enable debugging on all the
options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
FCoE Transit
567