Command Line Reference Guide

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping trust
Configure an interface as trusted.
S6000
Syntax
[no] ip dhcp snooping trust
Defaults Untrusted
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp source-address-validation
Enable the IP Source Guard.
S6000
Syntax
[no] ip dhcp source-address-validation [ipmac]
Parameters
ipmac Enable IP+MAC Source Address Validation.
Defaults Disabled
Command
Modes
INTERFACE
544
Dynamic Host Configuration Protocol (DHCP)