Command Line Reference Guide

Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
show processes cpu (S-Series) — displays the CPU usage information based on the
processes running in an S-Series.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
show hardware stack-unit buffer
Display the counters for the specified port, minimum guaranteed buffer of a priority-group, and the
shared buffer. This command is supported on the S6000 platform.
Syntax
show hardware stack-unit <0-5> buffer unit <0-0> port {1-104 |
all} priority-group <0 -7> buffer-info
Parameters
stack-unit <0–
5>
Enter the keywords stack-unit to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is 0 to 5.
buffer unit <0–
5>
Enter the keyword buffer. To display the total buffer
statistics for the stack unit, enter the keyword total-buffer.
To display the buffer statistics for a specific unit, enter the
keyword
unit and a unit number 0 .
port To display the buffer statistics for a specific port, enter the
keyword port and a port number from 1 to 64.
all Display buffer statistics for all ports
priority-group Identifier of the priority group in the range of 0 to 7.
buffer-info To display total buffer information for the port, enter the
keywords buffer-info. To display a queue range, enter 0
to 14 for a specfic queue or all.
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.3.0.0 Introduced on the S6000 platform.
Usage
Information
The following table describes the fields in the output of the show command:
520
Debugging and Diagnostics