Command Line Reference Guide

unit number
counters
Enter the keyword unit along with a port-pipe number,
then the keyword counters to clear the counters on the
selected port-pipe. The range is 0 to 0 for the S6000.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear
the data plane statistics.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics to clear
the management statistics.
stack-port Enter the keywords stack-port then the port number of
the stacking port to clear the statistics of the particular
stacking port.
The range is 0 to 127 for the S6000.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
S6000
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–
0 counters
Parameters
stack-unit
number
Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is 0 to 5 for the S6000.
510
Debugging and Diagnostics