Command Line Reference Guide

show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
S6000
Syntax
show interface port-type slot/port pfc statistics
Parameters
port-type Enter the port type.
slot/port Enter the slot/port number.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version
8.3.16.0
Introduced on the MXL 10/40GbE Switch IO Module.
Example
(Summary)
Dell (conf-if-te-0/1)#show int te 0/1 pfc statistics
Interface TenGigabitEthernet 0/1
Priority Rx XOFF Frames Rx Total
Frames Tx Total Frames
---------------------------------------------------------------
-----------------------
-
0 0
0 0
1 0
0 0
2 0
0 0
3 0
0 0
4 0
0 0
5 0
0 0
6 0
0 0
7 0
0 0
464
Data Center Bridging (DCB)