Command Line Reference Guide

Related
Commands
interface_management_ethernet_ip_address — Assign an IP address to the
Management Ethernet interface.
reload — Configure speed, duplex, and negotiation settings for the management
interface.
show serial console baud rate
Use the show serial console to show the values of the serial console baud rate.
S6000
Syntax show serial console baudrate
Command
Modes
BOOT_USER
Command
History
Version 9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show serial console baudrate
Serial console baudrate = 9600
watchdog <string>
Enable the watchdog timer, when the enabled watchdog timer is set to 60 seconds.
S6000
Syntax <string> enable | disable | status | timeout | settimeout
watchdog timer
Parameters
enable
Enter the keyword enable to enable the watchdog.
disable
Enter the keyword disable to disable the watchdog.
status
Enter the keyword status to see the watchdog status.
timeout
Enter the keyword timeout to see the timeout configured for
the watchdog.
settimeout
Enter the keyword set timeout to set timeout.
Boot Command Line Interface
321