Command Line Reference Guide

show bootvar

Display boot configuration information.

S6000

Syntax show bootvar

Command

Modes

BOOT_USER

Command

History

Version 9.0.2.0 Introduced on the S6000.

Example

BOOT_USER # show bootvar

PRIMARY OPERATING SYSTEM BOOT PARAMETERS:

========================================

No Operating System boot parameters specified!

SECONDARY OPERATING SYSTEM BOOT PARAMETERS:

========================================

boot device : flash

file name : systema (FTOS system://A Partition)

DEFAULT OPERATING SYSTEM BOOT PARAMETERS:

========================================

boot device : tftp

file name : PS-SI-9-0-0-566.bin

Management Etherenet IP address : 10.16.133.17

Mask : 255.255.0.0

Server IP address : 10.16.1.200

Default Gateway IP address : 10.16.1.254

BOOT_USER #

Commands

boot_change— Change the primary, secondary, or default boot image

configuration.

boot_zero — Erase the configured primary, secondary, or default boot image

parameters.

Boot Command Line Interface

319