Command Line Reference Guide

Command
Modes
BOOT_USER
Command
History
Version 9.0.2.0 Introduced on the S6000.
Usage
Information
In the runtime CLI, use the ip address command in INTERFACE mode to change
the Management interface’s IP address.
To view the current IP address configured on the Management interface, enter the
show interfaces management ethernet command
Related
Commands
show_default-gateway — Display the IP address configured for the default
gateway.
show_interface_mangement_ethernet— Display the IP address configured for the
Management interface.
NVRAM erase
Erase all NVRAM contents alone.
S6000
Syntax nvram erase
Parameters
mac-address
Enter a MAC address in standard format.
Command
Modes
BOOT_ADMIN
Command
History
Version 9.0.2.0 Introduced on the S6000.
Usage
Information
Use this command to assign a MAC address if FTOS cannot find a default MAC
address.
Example
BOOT_USER # BOOT_ADMIN # nvram erase
Are you sure (y/n)? : yes
Erasing NVRAM sectors....Erasing NvRam of size 1024 KB ... DONE
Boot Command Line Interface
317