Command Line Reference Guide

Defaults Disabled
Command
Modes
VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Usage
Information
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
controller
Configures controller for the VXLAN instance on the platform.
S6000
Syntax
controller controller ID ip address port port-number tcp|ptcp|
pssl|ssl
Parameters
controller ID Enter the controller ID.
ip address Enter the IP address of the controller.
port port-
number
(OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is
6632.
tcp (OPTIONAL) Enter the keyword tcp to configure tcp
connection to controller.
ptcp (OPTIONAL) Enter the keyword ptcp to configure passive
tcp connection to controller.
pssl (OPTIONAL) Enter the keyword pssl to configure passive ssl
connection to controller.
ssl (OPTIONAL) Enter the keyword ssl to configure ssl
connection to controller (Default).
Defaults Disabled
1488
Virtual Extensible LAN (VXLAN)