Command Line Reference Guide

Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added dot1p and IPv6 DSCP.
pre-Version
6.1.1.1
Introduced on the E-Series
Usage
Information
When you configure trust, matched bytes/packets counters are not incremented
in the show qos statistics command.
Dynamic mapping honors packets marked according to the standard definitions of
DSCP. The following lists the default mapping.
DSCP/CP
hex Range
(XXX)
DSCP
Definition
Traditional
IP
Precedenc
e
S6000
Internal
Queue ID
S-Series
Internal
Queue ID
DSCP/CP
Decimal
111XXX Network
Control
7 3 48–63
110XXX Internetwo
rk Control
6 3 48–63
101XXX EF
(Expedited
Forwarding
)
CRITIC/EC
P
5 2 32–47
100XXX AF4
(Assured
Forwarding
)
Flash
Override
4 2 32–47
011XXX AF3 Flash 3 1 16–31
010XXX AF2 Immediate 2 1 16–31
001XXX AF1 Priority 1 0 0–15
000XXX BE (Best
Effort)
Best Effort 0 0 0–15
wred
Designate the WRED profile to yellow or green traffic.
S6000
Syntax
wred {yellow | green} profile-name
To remove the WRED drop precedence, use the no wred {yellow | green} [profile-
name] command.
Quality of Service (QoS)
1151