Command Line Reference Guide

Allowed (2)
Dell#
threshold
Specify the minimum and maximum threshold values for the configured WRED profiles.
S6000
Syntax threshold min number max number max-drop-probability
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 1 to 9360.
min number Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 1 to 9360.
max-drop-
probability
number
Enter the keyword max-drop-probability followed by the
maximum number of packets for the WRED profile. The
range is from 0 to 100 KB
Defaults none
Command
Modes
CONFIGURATION (config-wred)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
To configure the minimum and maximum threshold values for user-defined
profiles, use this command. Additionally, to modify the minimum and maximum
threshold values for the pre-defined WRED profiles, use this command. If you
delete the threshold values of the pre-defined WRED profiles, the profiles revert to
their original default values.
Quality of Service (QoS)
1149