Command Line Reference Guide

ManualsBrandsDell ManualsNetworkingNetworking S6000

1131

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Commands

rate shape — shapes traffic output as part of the designated policy.

qos-policy-output — creates a QoS output policy.

service-policy input

Apply an input policy map to the selected interface.

S6000

Syntax

service-policy input policy-map-name [layer2]

To remove the input policy map from the interface, use the no service-policy

input policy-map-name [layer2]

command.

Parameters

policy-map-

name

Enter the name for the policy map in character format (32

characters maximum). You can identify an existing policy

map or name one that does not yet exist.

layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2

Class Map. The default is

Layer 3.

Defaults Layer 3

Command

Modes

INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.