Installation guide

About this Guide | 7
1
About this Guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and
desk mounting, and connecting to a power source.
After you have completed the hardware installation and power-up of the S6000, for software
configuration information, refer to the FTOS Configuration Guide for the S6000 System and for
Command line interface (CLI) information, refer to the FTOS Command Line Reference Guide for the
S6000 System.
NOTE: For information about upgrading the S6000 system, refer to the FTOS Release Notes for the S6000
System. If you have any questions regarding FTOS versions and system upgrades, contact Dell Technical
Support.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this
equipment.
WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install
and power up this equipment. This equipment contains two power cords. Disconnect both power cords before
servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser
radiation.
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the
aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare into open
apertures.
Related Publications
For more information about the S6000 system, refer to the following documents:
• FTOS Configuration Guide for the S6000 System
• FTOS Command Line Reference Guide for the S6000 System
• FTOS Release Not es for the S6000 System
NOTE: For the most recent documentation and software, visit iSupport (registration for access to some
sections is required): http://www.dell.com/support/manuals .