Command Line Reference Guide

1 = default Designated Router priority (use the ip pim dr-
priority command)
DR = Designated Router
S = Sparse mode
Example
FTOS#show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Te 4/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Te 4/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Te 4/20 ] 00:00:51/00:01:24 v2 0
show ip pim snooping tib
Display information from the tree information base (TIB) discovered by PIM-SM snooping about multicast group
members and states.
S5000
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-
address]]
Parameters
vlan
vlan-id
(OPTIONAL) Enter a VLAN ID to display TIB information discovered by
PIM-SM snooping on a specified VLAN. The valid VLAN IDs range is 1
to 4094.
group-address
(OPTIONAL) Enter the group address in dotted decimal format
(A.B.C.D) to display TIB information discovered by PIM-SM snooping
for a specified multicast group.
source-address
(OPTIONAL) Enter the source address in dotted decimal format
(A.B.C.D) to display TIB information discovered by PIM-SM snooping
for a specified multicast source.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes output from the show ip pim snooping tib commands shown
in the Example below.
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
995