Command Line Reference Guide

Example
(Mapping)
FTOS#sh ip pim rp mapping
Group(s): 224.0.0.0/4
RP: 165.87.20.4, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:02:46
RP: 165.87.20.3, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:03:03
FTOS#
Example
(Address)
FTOS#sh ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
FTOS#
show ip pim snooping interface
Display information on VLAN interfaces with PIM-SM snooping enabled.
S5000
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a specified
VLAN configured for PIM-SM snooping. The valid VLAN IDs range is 1
to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip pim snooping interface commands shown in
the Example below.
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping enabled.
Ver/Mode Displays the PIM version number for each VLAN interface with PIM-
SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM snooping
on the interface.
993