Command Line Reference Guide

PIM-Sparse Mode (PIM-SM)

FTOS supports protocol-independent multicast (PIM) commands on the S5000 switch.

This chapter contains the following sections:

• IPv4 PIM-Sparse Mode Commands

• IPv6 PIM-Sparse Mode Commands

IPv4 PIM-Sparse Mode Commands

The following describes the IPv4 PIM-sparse mode (PIM-SM) commands.

clear ip pim rp-mapping

Used by the bootstrap router (BSR) to remove all or particular rendezvous point (RP) advertisement.

S5000

Syntax

clear ip pim rp-mapping rp-address

Parameters

rp-address

(OPTIONAL) Enter the RP address in dotted decimal format (A.B.C.D).

Command Modes EXEC Privilege

Command History

Version 9.0(1.3) Introduced on the S5000.

clear ip pim tib

Clear PIM tree information from the PIM database.

S5000

Syntax

clear ip pim tib [group]

977