Command Line Reference Guide

operator (OPTIONAL) For TCP and UDP parameters only. Enter one of the
following logical operand:
• eq = equal to
• neq = not equal to
• gt = greater than
• lt= less than
• range = inclusive range of ports (you must specify two ports
for the port command parameter.)
Defaults none
Command Modes REDIRECT-LIST
Command History
Version 9.0(1.3) Introduced on the S5000.
show ip redirect-list
View the redirect list configuration and the interfaces it is applied to.
S5000
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-
name
Enter the name of a configured Redirect list.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The show cam pbr command displays the PBR CAM content. The “VlanID” column displays
the corresponding VLAN ID to which the redirect-group is applied.
Example
FTOS#show ip redirect-list test
IP redirect-list rcl0:
Defined as:
seq 5 permit ip any host 182.16.2.10
seq 10 redirect 182.16.1.2 ip any any, Next-hop un-
reachable, ARP un-resolved
Applied interfaces:
Te 9/0
So 8/2
Vl 10
975