Command Line Reference Guide

show ip ospf statistics
Display OSPF statistics.
S5000
Syntax
show ip ospf process-id statistics global | [interface name
{neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
global Enter the keyword global to display the packet counts received on
all running OSPF interfaces and packet counts received and
transmitted by all OSPF neighbors.
interface name (OPTIONAL) Enter the keyword interface followed by one of the
following interface keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For Port Channel groups, enter the keywords port-
channel followed by a number. The range is 1 to 128.
• For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
neighbor router-
id
(OPTIONAL) Enter the keyword neighbor followed by the
neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes output from the show ip ospf statistics process-id
global command shown in the Example below.
Total Displays the total number of packets received/transmitted by the
OSPF process.
Error Displays the error count while receiving and transmitting packets by
the OSPF process.
Hello Number of OSPF Hello packets.
DDiscr Number of database description packets.
960