Command Line Reference Guide

• For a 10-Gigabit Ethernet interface, enter the keyword

tengigabitethernet followed by slot/port numbers.

The port range is 0 to 63.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE followed by slot/port numbers. The ports are 48,

52, 56, and 60.

• For a Loopback interface, enter the keyword loopback

followed by a number from 0 to 16383.

• For a Port Channel interface, enter the keywords port-

channel

followed by a number from 1 to 128.

• For a VLAN interface, enter the keyword vlan followed by a

VLAN id number from 1 to 4094.

Defaults The IP address on the system that is closest to the Telnet address is used in the outgoing

packets.

Command Modes CONFIGURATION

Command History

Version 9.0(1.3) Introduced on the S5000.

Commands

copy – copies files from and to the switch.

ip ftp username

Assign a user name for outgoing FTP connection requests.

S5000

Syntax

ip ftp username username

Parameters

username

Enter a text string as the user name up to 40 characters long.

Defaults No user name is configured.

Command Modes CONFIGURATION

Command History

Version 9.0(1.3) Introduced on the S5000.

Usage

Information

You must also configure a password with the ip ftp password command.

Commands

ip ftp password – sets the password for FTP connections.