Command Line Reference Guide

Usage
Information
The hostname is used in the prompt.
ip ftp password
Specify a password for outgoing FTP connections.
S5000
Syntax
ip ftp password [encryption-type] password
Parameters
encryption-type (OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
password Enter a string up to 40 characters as the password.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The password is listed in the configuration file; you can view the password by entering the
show running-config ftp command.
The password configured by the ip ftp password command is used when you use the
ftp: parameter in the copy command.
Related
Commands
copy – copy files.
ip ftp username – sets the user name for the FTP sessions.
ip ftp source-interface
Specify an interface’s IP address as the source IP address for FTP connections.
S5000
Syntax
ip ftp source-interface type slot/port
Parameters
source-
interface type
slot/port
Enter the source-interface keyword followed by the interface
type and slot/port or number information. Valid slot numbers are 0-11.
The valid port numbers for each interface type are listed below.
95