Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
S5000
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value
] [route-map map-name] [tag tag-value] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS
Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number. The
range is 0 (zero) to 4294967295.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 9.0(1.3) Introduced on the S5000.
937