Command Line Reference Guide
Command Modes ROUTER OSPF
Command History
Version 9.0(1.3) Introduced on the S5000.
maximum-paths
Enable the software to forward packets over multiple paths.
S5000
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths command.
Parameters
number
Specify the number of paths. The range is 1 to 16. The default is 4
paths.
Defaults 4
Command Modes ROUTER OSPF
Command History
Version 9.0(1.3) Introduced on the S5000.
mib-binding
Enable this OSPF process ID to manage the SNMP traps and process SNMP queries.
S5000
Syntax
mib-binding
To mib-binding on this OSPF process, use the no mib-binding command.
Defaults none.
Command Modes ROUTER OSPF
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command is either enabled or disabled. If no OSPF process is identified as the MIB
manager, the first OSPF process is used.
If an OSPF process has been selected, it must be disabled prior to assigning new process ID
the MIB responsibility.
931