Command Line Reference Guide

key
Enter a continuous character string as the password.
Defaults No MD5 authentication is configured.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To change to a different key on the interface, enable the new key while the old key is still
enabled. The FTOS sends two packets: the first packet authenticated with the old key and the
second packet authenticated with the new key. This process ensures that the neighbors learn
the new key and communication is not disrupted by keeping the old key enabled.
After the reply is received and the new key is authenticated, you must delete the old key. Dell
Networking recommends keeping only one key per interface.
NOTE: The MD5 secret is stored as plain text in the configuration file with service
password encryption.
ip ospf mtu-ignore
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
S5000
Syntax
ip ospf mtu-ignore
To return to the default, use the no ip ospf mtu-ignore command.
Defaults Enabled.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ip ospf network
Set the network type for the interface.
S5000
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast Enter the keyword broadcast to designate the interface as part of
a broadcast network.
928