Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
By default, the dead interval is four times the default hello-interval.
Related
Commands
ip ospf hello-interval – sets the time interval between the hello packets.
ip ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
S5000
Syntax
ip ospf hello-interval seconds
To return to the default value, use the no ip ospf hello-interval command.
Parameters
seconds
Enter the number of seconds for the interval. The range is 1 to 65535.
The default is 10 seconds.
Defaults 10 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The time interval between the hello packets must be the same for routers in a network.
Related
Commands
ip ospf dead-interval – sets the time interval before a router is declared dead.
ip ospf message-digest-key
Enable OSPF MD5 authentication and send an OSPF message digest key on the interface.
S5000
Syntax
ip ospf message-digest-key keyid md5 key
To delete a key, use the no ip ospf message-digest-key keyid command.
Parameters
keyid
Enter a number as the key ID. The range is 1 to 255.
927