Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
ip ospf auth-change-wait-time
OSPF provides a grace period while OSPF changes its interface authentication type. During the grace period, OSPF
sends out packets with new and old authentication scheme untill the grace period expires.
S5000
Syntax
ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time command.
Parameters
seconds Enter the seconds. The range is 0 to 300.
Defaults zero (0) seconds.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
ip ospf authentication-key
Enable authentication and set an authentication key on OSPF traffic on an interface.
S5000
Syntax
ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key command.
Parameters
encryption-type (OPTIONAL) Enter 7 to encrypt the key.
key Enter an eight-character string. Strings longer than eight characters
are truncated.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
925