Command Line Reference Guide
to reduce flooding overhead by selectively flooding on a subset of the interfaces between two
routers.
When you enable flood-2328, this command configures FTOS to flood LSAs on all
interfaces.
graceful-restart grace-period
Specifies the time duration, in seconds, that the router’s neighbors will continue to advertise the router as fully adjacent
regardless of the synchronization state during a graceful restart.
S5000
Syntax
graceful-restart grace-period seconds
To disable the grace period, use the no graceful-restart grace-period
command.
Parameters
seconds
Time duration, in seconds, that specifies the duration of the restart
process before OSPF terminates the process. The range is 40 to 1800
seconds.
Defaults Not Configured
Command Modes ROUTER OSPF
Command History
Version 9.0(1.3) Introduced on the S5000.
graceful-restart helper-reject
Specify the OSPF router to not act as a helper during graceful restart.
S5000
Syntax
graceful-restart helper-reject ip-address
To return to default value, use the no graceful-restart helper-reject command.
Parameters
ip-address
Enter the OSPF router-id, in IP address format, of the restart router
that
will not
act as a helper during graceful restart.
Defaults Not configured.
Command Modes ROUTER OSPF
923