Command Line Reference Guide

not-advertise (OPTIONAL) Enter the keywords not-advertise to set the status

to DoNotAdvertise (that is, the Type 3 summary-LSA is suppressed

and the component networks remain hidden from other areas.)

Defaults Not configured.

Command Modes ROUTER OSPF

Command History

Version 9.0(1.3) Introduced on the S5000.

Usage

Information

Only the routes within an area are summarized, and that summary is advertised to other areas

by the ABR. External routes are not summarized.

Commands

area stub – creates a stub area.

router ospf – enters ROUTER OSPF mode to configure an OSPF instance.

area stub

Configure a stub area, which is an area not connected to other areas.

S5000

Syntax

area area-id stub [no-summary]

To delete a stub area, use the no area area-id stub command.

Parameters

area-id

Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a

number from zero (0) to 65535.

no-summary (OPTIONAL) Enter the keywords no-summary to prevent the ABR

from sending summary Link State Advertisements (LSAs) into the stub

area.

Defaults Disabled.