Command Line Reference Guide

exec-banner
Enable the display of a text string when the user enters EXEC mode.
S5000
Syntax
exec-banner
Defaults Enabled on all lines (if configured, the banner appears).
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Optionally, use the banner exec command to create a text string that is displayed when you
access EXEC mode. This command toggles that display.
Related
Commands
banner exec – configures a banner to display when entering EXEC mode.
line – enables and configures console and virtual terminal lines to the system.
exec-timeout
Set a time interval the system will wait for input on a line before disconnecting the session.
S5000
Syntax
exec-timeout minutes [seconds]
Parameters
minutes Enter the number of minutes of inactivity on the system before
disconnecting the current session. Range: 0 to 35791. Default: 10
minutes for console line; 30 minutes for VTY line.
seconds (OPTIONAL) Enter the number of seconds Range: 0 to 2147483.
Default: 0 seconds.
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To remove the time interval, enter exec-timeout 0 0.
Example
FTOS con0 is now available
Press RETURN to get started.
FTOS>
91