Command Line Reference Guide

Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication
between servers and a SAN fabric.
show npiv devices
Display the FCoE and FC devices currently logged in to an S5000 NPIV proxy gateway.
S5000
Syntax
show npiv devices [brief]
Parameters
brief Displays an overview of current server CNA-fabric connections over
an S5000 NPIV proxy gateway.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the show npiv devices command to display information on the server CNA, server-
facing Ethernet and fabric-facing FC ports, and the SAN fabric in each server-fabric
connection over an S5000 NPIV proxy gateway.
The following table describes the show npiv devices brief output shown in the
example below.
Field Description
ENode-Intf S5000 Ethernet interface ( slot/port ) to which a server CNA is
connected.
ENode-WWPN Worldwide port name (WWPN) of a server CNA port.
FCoE-Vlan VLAN ID of the dedicated VLAN used to transmit FCoE traffic to and
from the fabric.
Fabric-Intf Fabric-facing Fibre Channel port ( slot/port ) on which FC traffic is
transmitted to the specified fabric.
Fabric-Map Name of the FCoE map containing the FCoE/FC configuration
parameters for the server CNA-fabric connection.
LoginMethod Method used by the server CNA to log in to the fabric; for example:
FLOGI - ENode logged in using a fabric login (FLOGI).
FDISC - ENode logged in using a fabric discovery (FDISC).
903