Command Line Reference Guide
fcf-priority
In an FCoE map, configure the priority used by a server CNA to select an upstream FCoE forwarder (FCF).
S5000
Syntax
fcf—priority priority
Parameters
priority
Enter the priority assigned to the S5000 NPIV proxy gateway, which
appears to a downstream server CNA as an FCF. The range of FCF
priority values is from 1 to 255.
Defaults 128
Command Modes FCOE MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The FCF priority you assign to an S5000 is used by server CNAs to select an upstream FCF to
use for a fabric login (FLOGI).
To remove a configured FCF priority from an FCoE map, enter the no fcf-priority
command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication
between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in FCoE
maps.
fcoe-map
Create an FCoE map which contains the parameters used to configure the links between server CNAs and a SAN fabric.
Apply the FCoE map on a server-facing Ethernet port.
S5000
Syntax
fcoe-map map-name
Parameters
map-name
Maximum: 32 alphanumeric characters.
Defaults None
Command Modes CONFIGURATION
INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
895