Command Line Reference Guide

Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication
between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in FCoE
maps.
fc-map
In an FCoE map, configure the FCoE mapped address prefix (FC-MAP) value which is used to identify FCoE traffic
transmitted on the FCoE VLAN for the specified fabric.
S5000
Syntax
fc—map fc-map-value
Parameters
fc-map-value Enter the unique MAC address prefix used by a SAN fabric.
The range of FC-MAP values is from 0EFC00 to 0ECFF.
Defaults None
Command Modes FCOE MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The FC-MAP value you enter must match the FC-MAP value used by an FC switch or FCoE
forwarder (FCF) in the fabric. An FC switch accepts only FCoE traffic that uses the correct FC-
MAP value.
The FC-MAP value is used to generate the fabric-provided MAC address (FP-MAC). The FPMA
is used by servers to transmit FCoE traffic to the fabric. An FC-MAP can be associated with
only one FCoE VLAN and vice versa.
In an FCoE map, the FC-MAP value, fabric ID, and FCoE VLAN parameters must be unique.
To remove a configured FC-MAP value from an FCoE map, enter the no fc-map command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication
between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in FCoE
maps.
894