Manualshelf

Command Line Reference Guide

ManualsBrandsDell Manualscomputer componentsNetworking S5000
881882883884885886887888889890
show ip rpf
View reverse path forwarding.
S5000
Syntax
show ip rpf
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Static mroutes are used by network administrators to control the reach-ability of the multicast
sources. If a PIM-registered multicast source is reachable using static mroute as well as
unicast route, the distance of each route is examined and the route with shorter distance is the
one the PIM selects for reach-ability.
NOTE: The default distance of mroutes is zero (0) and is CLI configurable on a per route
basis.
Example
FTOS#show ip rpf
RPF information for 10.10.10.9
RPF interface: Te 3/4
RPF neighbor: 165.87.31.4
RPF route/mask: 10.10.10.9/255.255.255.255
RPF type: unicast
IPv6 Multicast Commands
The following section contains the IPv6 multicast commands.
ip multicast-limit
Use this feature to limit the number of multicast entries on the system.
S5000
Syntax
ip multicast-limit limit
Parameters
limit
Enter the desired maximum number of multicast entries on the
system. The range is 1 to 2000.
882