Command Line Reference Guide

disable
Return to EXEC mode.
S5000
Syntax
disable [level]
Parameters
level
(OPTIONAL) Enter a number for a privilege level of the FTOS. Range: 0
to 15. Default: 1.
Defaults 1
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
do
Allows the execution of most EXEC-level commands from all CONFIGURATION levels without returning to the EXEC level.
S5000
Syntax
do command
Parameters
command
Enter an EXEC-level command.
Defaults No default behavior.
Command Modes
CONFIGURATION
INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following commands are
not
supported by the do command:
enable
disable
exit
config
Example
FTOS(conf-if-te-5/0)#do clear counters
Clear counters on all interfaces [confirm]
FTOS(conf-if-te-5/0)#
FTOS(conf-if-te-5/0)#do clear logging
Clear logging buffer [confirm]
88