Command Line Reference Guide
ip mroute
Assign a static mroute.
S5000
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {
ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination
mask
command.
Parameters
destination
Enter the IP address in dotted decimal format of the destination
device.
mask
Enter the mask in slash prefix formation ( /x ) or in dotted decimal
format.
null 0 (OPTIONAL) Enter the keyword null followed by zero (0).
[
protocol
[
process-id
|
tag
]
ip-address
]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in
dotted decimal format of the reverse path forwarding (RPF)
neighbor. The range is 1 to 65535.
• Enter the OSPF process identification number followed by the
IP address in dotted decimal format of the RPF neighbor. the
range is 1 to 65535.
• Enter the IS-IS alphanumeric tag string followed by the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF
neighbor.
static
ip-address
(OPTIONAL) Enter the Static IP address in dotted decimal format of
the RPF neighbor.
ip-address
(OPTIONAL) Enter the IP address in dotted decimal format of the RPF
neighbor.
distance
(OPTIONAL) Enter a number as the distance metric assigned to the
mroute. The range is 0 to 255.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
878