Command Line Reference Guide
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
ip multicast-msdp
Enable MSDP.
S5000
Syntax
ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
show ip msdp
Display the MSDP peer status, SA cache, or peer summary.
S5000
Syntax
show ip msdp {peer peer address | sa-cache | summary}
Parameters
peer
peer
address
Enter the keyword peer followed by the peer address in a dotted
decimal format (A.B.C.D.).
sa-cache Enter the keywords sa-cache to display the Source-Active cache.
summary Enter the keyword summary to display a MSDP peer summary.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
860