Command Line Reference Guide

Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered,
LLDP-MED endpoint device.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med softphone-voice
Configure the system to advertise softphone to enable IP telephony on a computer so that the computer can be used as
a phone.
S5000
Syntax
advertise med softphone-voice {vlan-id} | {priority-tagged
number}
To return to the default, use the no advertise med softphone-voice {vlan-
id } | priority-tagged number} command.
Parameters
vlan-id
Enter the VLAN ID. The range is 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
849