Command Line Reference Guide

advertise med location-identification
Configure the system to advertise a location identifier.
S5000
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value}
command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based followed by the
coordinated based location in hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based followed by the civic based
location in hexadecimal format. The range is 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin followed by the Emergency Call
Service (ecs) Emergency Location Identification Number (elin)
numeric location string. The range is 10 to 25 characters.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
• ECS — Emergency call service such as defined by TIA or the national emergency
numbering association (NENA)
• ELIN — Emergency location identification number, a valid North America Numbering
Plan format telephone number supplied for ECS purposes.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med power-via-mdi
Configure the system to advertise the Extended Power via MDI TLV.
S5000
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
848