Command Line Reference Guide
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
protocol lldp (Configuration) – enables LLDP globally.
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med guest-voice-signaling
Configure the system to advertise a separate limited voice service for a guest user when the guest voice control packets
use a separate network policy than the voice data.
S5000
Syntax
advertise med guest-voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med guest-voice-signaling
{vlan-id layer2_priority DSCP_value} | {priority-tagged number}
command.
Parameters
vlan-id
Enter the VLAN ID. The range is 1 to 4094.
layer2_priority
Enter the Layer 2 priority. The range is 0 to 7.
DSCP_value
Enter the DSCP value. The range is 0 to 63.
priority-tagged
number
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
847