Command Line Reference Guide

all (OPTIONAL) Enter the keyword all to display information on all
interfaces.
events (OPTIONAL) Enter the keyword events to display major events such
as timer events.
packet (OPTIONAL) Enter the keyword packet to display information
regarding packets coming in or going out.
brief (OPTIONAL) Enter the keyword brief to display brief packet
information.
detail (OPTIONAL) Enter the keyword detail to display detailed packet
information.
tx (OPTIONAL) Enter the keyword tx to display transmit only packet
information.
rx (OPTIONAL) Enter the keyword rx to display receive only packet
information.
both (OPTIONAL) Enter the keyword both to display both receive and
transmit packet information.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
disable
Enable or disable LLDP.
S5000
Syntax
disable
To enable LLDP, use the no disable command.
Defaults Enabled, that is no disable.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
protocol lldp (Configuration) – enables LLDP globally.
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
841