Command Line Reference Guide
Parameters
system-
capabilities
Enter the keywords system-capabilities to advertise the
system capabilities TLVs.
system-
description
Enter the keywords system-description to advertise the
system description TLVs.
system-name Enter the keywords system-description to advertise the
system description TLVs.
Defaults none
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
All three command options—system-capabilities, system-description, and
system-name—can be invoked individually or together, in any sequence.
clear lldp counters
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.
S5000
Syntax
clear lldp counters interface type slot/port
Parameters
interface
type
slot/port
Enter the interface keyword followed by the interface type and
slot/port information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
839