Command Line Reference Guide
vlan-name Enter the keywords vlan-name to advertise the vlan-name TLV.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
protocol lldp (Configuration) – enables LLDP globally.
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
S5000
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-
size}
command.
Parameters
max-frame-size Enter the keywords max-frame-size to advertise the dot3
maximum frame size.
Defaults none
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 9.0(1.3) Introduced on the S5000.
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
S5000
Syntax
advertise management -tlv {system-capabilities | system-
description | system-name}
To remove advertised management TLVs, use the no advertise management -tlv
{system-capabilities | system-description | system-name} command.
838