Command Line Reference Guide
Parameters
seconds
Enter a number as the time between FEFD control packets. The range
is 3 to 300 seconds. The default is
15 seconds.
Defaults 15 seconds
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• fefd – enables far-end failure detection.
• fefd-global – enables FEFD globally on the system.
fefd interval
Set an interval between control packets.
S5000
Syntax
fefd interval seconds
To return to the default value, use the no fefd interval command.
Parameters
seconds
Enter a number as the time between FEFD control packets. The range
is 3 to 300 seconds. The default is 15 seconds.
Defaults 15 seconds
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
• fefd – enables far-end failure detection.
fefd mode
Change the FEFD mode on an interface.
S5000
Syntax
fefd mode {normal | aggressive}]
To return the FEFD mode to the default of normal, use the no fefd mode command.
833