Command Line Reference Guide
fefd
Enable far-end failure detection on an interface.
S5000
Syntax
fefd
To disable FEFD on an interface, use the no fefd command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you enter no fefd for an interface and fefd-global, FEFD is enabled on the interface
because the no fefd command is not retained in the configuration file. To keep the interface
FEFD disabled when the global configuration changes, use the fefd reset command.
Related
Commands
• fefd disable – disables far-end failure detection on an interface.
• fefd reset – enables FEFD globally on the system.
• fefd mode – changes FEFD mode on an interface.
fefd disable
Disable FEFD on an interface only. This command overrides the fefd reset command for the interface.
S5000
Syntax
fefd disable
To re-enable FEFD on an interface, use the no fefd disable command.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you enter no fefd for an interface and fefd-global, FEFD is enabled on the interface
because the no fefd command is not retained in the configuration file. To keep the interface
FEFD disabled when the global configuration changes, use the
fefd reset command.
Related
Commands
• fefd reset – enables FEFD globally on the system.
• fefd mode – changes FEFD mode on an interface.
831