Command Line Reference Guide

Related
Commands
interface vlan – configures a VLAN.
tagged – specifies which interfaces in a VLAN are tagged.
untagged
Add a Layer 2 interface to a VLAN as an untagged interface.
S5000
Syntax
untagged interface-type slot/port
To remove an untagged interface from a VLAN, use the no untagged interface-type
slot/port
command.
Parameters
interface-type
slot/port
Enter the interface type and slot/port or number information. Valid slot
numbers are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
Defaults All interfaces in Layer 2 mode are untagged.
Command Modes INTERFACE VLAN
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Untagged interfaces can only belong to one VLAN.
In the Default VLAN, you cannot use the no untagged interface command. To remove
an untagged interface from all VLANs, including the Default VLAN, enter INTERFACE mode and
use the no switchport command.
Related
Commands
interface vlan – configures a VLAN.
tagged – specifies which interfaces in a VLAN are tagged.
829