Command Line Reference Guide

3 0 1800 3.3.3.2/24
FTOS#
Example (Name)
FTOSconf)#interface vlan 222
FTOS(conf-if-vl-222)#name test
FTOS(conf-if-vl-222)#do show vlan name test
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
222 Inactive U Te 1/22
FTOS(conf-if-vl-222)#
Related
Commands
vlan-stack compatible – enables the Stackable VLAN feature on the selected VLAN.
interface vlan – configures a VLAN.
tagged
Add a Layer 2 interface to a VLAN as a tagged interface.
S5000
Syntax
tagged interface-type slot/port
To remove a tagged interface from a VLAN, use the no tagged interface-type
slot/port command.
Parameters
interface-type
slot/port
Enter the interface type and slot/port or number information. Valid slot
numbers are 0-11. The valid port numbers for each interface type are
listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
Defaults All interfaces in Layer 2 mode are untagged.
Command Modes INTERFACE VLAN
Command History
Version 9.0(1.3) Introduced on the S5000.
827